0 Which nozzle size does it ship with? 2011-12-12 12:15:59
It ships with 0.4mm nozzle size.
1 Does it connect to a computer direct usb or wifi? or does it only use sd cards? 2011-12-12 12:15:59
This printer could printing use USB connect to a computer directly. but no wifi. also could use sd cards.
2 Can the E-one be paused, turned off completely, turned back on and then resume printing? 2011-12-12 12:15:59
Yes, it can be paused and saved the point, turned off completely, turned back on and then resume printing.
3 Is this dual z axis rods? 2011-12-12 12:15:59
Yes, E-one is dual z axis rods.
4 Does it come with A 32bit main board or a 8bit? 2011-12-12 12:15:59
It comes with a 32bit main board.
5 Can I change to a dual extruder, to be able to print two differant materials? 2011-12-12 12:15:59
Sorry, unable to change to a dual extruder. It's only has one extruder driver port on the motherboard.
6 Will this printer support alternative materials such as: tpu, tpe? 2011-12-12 12:15:59
Because E-one comes with bowden extruder type, so it won't support the soft material like tpu or tpe, which easily results in the clogging.
7 Does it have a built in filament sensor to pause when you are out of filament? 2011-12-12 12:15:59
Yes, there is a filament run out sensor to pause when we are out of filament.
8 Is the build plate auto-leveling, or do you have to level it yourself? 2011-12-12 12:15:59
It comes with manual leveling, we have to level it by ourselves.
9 Is it easy to find replacement parts for the printer? 2011-12-12 12:15:59
You can buy the standard one in the market , or you can come to us with email@example.com.
10 How long does it take to put together?(E-one) 2011-12-12 12:15:59
It takes around 20 - 30 minutes to assemble it.
11 What is the highest temperature of the nozzle? (E-one) 2011-12-12 12:15:59
The highest temperature of the nozzle is 260℃.
12 How can I clean the printing platform? How often should I change a new one?(E-one) 2011-12-12 12:15:59
You can gently scrape off the residue in the printing platform witha knife. You can change the new one when it is broken.
13 How often do I need to do leveling? Every time before printing the model?(E-one) 2011-12-12 12:15:59
You can do the leveling when use the printer for the first time or the print results is failure or look no so good, but no need to do the leveling every time before printing the model.
14 Does this 3D printer come with software? (E-one) 2011-12-12 12:15:59
Yes, you can kindly find the slicing software in SD card.
15 Is this 3d printer able to print metal?(E-one) 2011-12-12 12:15:59
No it cannot print actual metal.
16 Will it work on 220v power?(E-one) 2011-12-12 12:15:59
Yes. The voltage ranges from 100 to 240v.
17 Where can I find an operating manual?（E-one) 2011-12-12 12:15:59
You can find the instruction manual in the SD card.
18 Does this come with a sd card ? 2011-12-12 12:15:59
Yes, It comes with a sd card, with instruction and software inside.
19 Does it have a heated bed? 2011-12-12 12:15:59
Yes, it has a heated bed.
Skype / WhatsApp: +86-13860126490 / +86 592-5713513
No.88-3, North Tongji Road, Xike County, Tong’an District, Xiamen, Fujian China
Address: No.88-3, North Tongji Road, Xike County, Tong’an District, Xiamen, Fujian China