0 Is there any requirement for the working environment?（Giant） 2011-12-12 12:15:59
The recommended working environment is +5C ~ 35C and 30 - 90% relative humidity (non-condensing).
1 Can this printer print flexible filament? If so, do you use the same settings as normal pla?（Giant） 2011-12-12 12:15:59
Yes, this printer can print flexible filament. We can't use the same settings as normal PLA, but you can kindly check the setting in detail for different filament in Cura when adding goofoo model and choose different filament type.
2 Will it print carbon fiber filament?（Giant） 2011-12-12 12:15:59
Yes, it will print carbon fiber filament, and we suggest to use the nozzle of hardened steel type instead of brass type.
3 What is the right tightness for the A4 paper of leveling type?（Giant） 2011-12-12 12:15:59
We can feel some slight resistance between the nozzle and the A4 paper when we pull the A4 paper back and forth.
4 How to connect the WiFi module?（Giant） 2011-12-12 12:15:59
You can kindly find the wifi program and instruction in SD card.
5 How could I choose a ideal speed? What is the max speed can I set when printing some simple models?（Giant） 2011-12-12 12:15:59
You can set the print speed 20mm/s - 100mm/s as needs. But the lower speed, the better quality.
6 Can this resume printing after a sudden power failure?（Giant） 2011-12-12 12:15:59
Yes, there is the power failure recovery function.
7 Can this be paused, turned off completely, turned back on and then resume printing?（Giant） 2011-12-12 12:15:59
Yes, it can be paused and saved the point, turned off completely, turned back on and then resume printing.
8 Which version of cura does your machine support?（Giant） 2011-12-12 12:15:59
Our machine supports all versions of Cura.
9 Does it connect to a computer direct usb or wifi? or does it only use sd cards?（Giant） 2011-12-12 12:15:59
You can use the printer via SD card, USB cable to connect computer and wifi as well.
10 Will this printer support soft materials such as: tpu, tpe?（Giant） 2011-12-12 12:15:59
Yes, it comes with direct extruder and supports the soft filament like TPU, TPE.
11 Does it have a built in filament sensor to pause when you are out of filament?（Giant） 2011-12-12 12:15:59
Yes, there is filament run out sensor.
12 Is the build plate auto-leveling, or do you have to level it yourself?（Giant） 2011-12-12 12:15:59
The build plate is manual levelling, we have to level it by ourselves.
13 Is it easy to find replacement parts for the printer?（Giant） 2011-12-12 12:15:59
Yes, you can buy the standard one in the market , or you can come to us with email@example.com.
14 What is the highest temperature of the nozzle?（Giant） 2011-12-12 12:15:59
The highest temperature of the nozzle is 260℃ or 400℃.
15 How can I clean the printing platform? How often should I change a new one?（Giant） 2011-12-12 12:15:59
You can gently scrape off the residue in the printing platform with a knife. You can change the new blue tape when it is broken.
16 How often do I need to do leveling? Every time before printing the model?（Giant） 2011-12-12 12:15:59
You can do the leveling when use the printer for the first time or the print results is failure or look no so good, but no need to do the leveling every time before printing the model.
17 Does this 3D printer come with software? （Giant） 2011-12-12 12:15:59
Yes, you can kindly find the slicing software in SD card.
18 Does this have an option for a camera add-on?（Giant） 2011-12-12 12:15:59
Yes, the camera is included in this model.
19 How is this machine at avoiding clogging, specifically with carbon fiber nylon?（Giant） 2011-12-12 12:15:59
It is better to change the brass nozzle to the hardened steel nozzle when print with abrasive filament like carbon fiber nylon and used the recommended settings.
Skype / WhatsApp: +86-13860126490 / +86 592-5713513
No.88-3, North Tongji Road, Xike County, Tong’an District, Xiamen, Fujian China
Address: No.88-3, North Tongji Road, Xike County, Tong’an District, Xiamen, Fujian China