FAQ
FAQ
Integrate The 3D Printing Into Daily Life!
图片名称
0 Is this food grade? 2011-12-12 12:15:59
None of our filaments have FDA approval and certainly they are not food safe. I think no filaments have such FDA approval on market. Not only filament itself, but also FDM printing technology is also an issue. FDM printing leaves a lot of micron holes on prints and they are good bacterial ground. So even if you find an FDA approved material, the FDM printing itself won't make anything food safe.
图片名称
1 It seems there's some smell when printing. Is it harmful to the health? 2011-12-12 12:15:59
The PLA is made of corn starch, which is biodegradible and unharmful to the health.
图片名称
2 This filament is 1.75? 2011-12-12 12:15:59
Yes, it is 1.75mm in diameter. And we provide 2.85mm in diameter as needs as well.
图片名称
3 How long is the material? 2011-12-12 12:15:59
It is around 340 - 360 meters.
图片名称
4 Does this filament include a resealable bag? 2011-12-12 12:15:59
No it comes in vacuum sealed bag that cannot be resealed.
图片名称
5 Would this PLA+ work on other brands' 3d printer? 2011-12-12 12:15:59
As long as the machine takes 1.75mm filament and can heat the nozzle to 190-220c, then yes.
图片名称
6 What is the dimension of the spool? 2011-12-12 12:15:59
55mm in inner diameter and 200 mm in outer diameter by 67 mm wide
图片名称
7 What is the net weight of the filament? Does the 1 kilo include the spool? 2011-12-12 12:15:59
The net weight of the filament is 1kg, which doen't include the spool. The total weight is around 1.4 kg including the spool.
图片名称
8 Does the PLA+ contain any nylon or ABS? or is it pure PLA? 2011-12-12 12:15:59
It doesn't contain any nylon or ABS, it's just basic PLA but a little bit tougher than pure PLA to make it not so brittle as pure PLA.
图片名称
9 How many materials do I need to print this model? 2011-12-12 12:15:59
It depends on the model size you want to print. The weight is 1kg for one spool and around 340 - 360 meters, meaning we need around 0.34 - 0.36 meters to print the model of 1g weight.
< 1 >