FAQ
FAQ
Integrate The 3D Printing Into Daily Life!
图片名称
0 What is the right tightness for the A4 paper of leveling type?(Mini+) 2011-12-12 12:15:59
We can feel some slight resistance between the nozzle and the A4 paper when we pull the A4 paper back and forth.
图片名称
1 Can this be paused, turned off completely, turned back on and then resume printing?(Mini+) 2011-12-12 12:15:59
Yes, it can be paused and saved the point, turned off completely, turned back on and then resume printing.
图片名称
2 Can i print nylon out of the box or do i need to replace the hot end?(Mini+) 2011-12-12 12:15:59
Yes, you can print nylon out of the box, no need to replace the hot end.
图片名称
3 Can you use 2 colors or more?(Mini+) 2011-12-12 12:15:59
Sorry, couldn't use 2 colors at the same time. But we can change it to 2 in 1 out extruder to realize dual color or gradient color printing at the same time.
图片名称
4 Does it connect to a computer direct usb or wifi? or does it only use sd cards?(Mini+) 2011-12-12 12:15:59
This printer could printing use USB connect to a computer directly. And we can add the WIFI module. also could use sd cards.
图片名称
5 Does it come with A 32bit main board or a 8bit?(Mini+) 2011-12-12 12:15:59
It comes with a 32bit main board.
图片名称
6 Can I change to a dual extruder, to be able to print two differant materials?(Mini+) 2011-12-12 12:15:59
Sorry, unable to change to a dual extruder. It's only has one extruder driver port on the motherboard. But we can change it to 2 in 1 out extruder, with which we can print dual color or gradient color at one time.
图片名称
7 Will this printer support alternative materials such as: tpu, tpe?(Mini+) 2011-12-12 12:15:59
Yes, it comes with direct extruder, which supports the soft filament like TPU, TPE.
图片名称
8 Does it have a built in filament sensor to pause when you are out of filament?(Mini+) 2011-12-12 12:15:59
No, there isn't filament run out sensor.
图片名称
9 Is the build plate auto-leveling, or do you have to level it yourself?(Mini+) 2011-12-12 12:15:59
It comes with manual leveling, we have to level it by ourselves.
图片名称
10 Is it easy to find replacement parts for the printer?(Mini+) 2011-12-12 12:15:59
You can buy the standard one in the market , or you can come to us with sales@goofoo3d.com.
图片名称
11 How long does it take to put together?(Mini+) 2011-12-12 12:15:59
It is fully assembly and you can plug and play when take it out of the box.
图片名称
12 What is the highest temperature of the nozzle?(Mini+) 2011-12-12 12:15:59
The highest temperature of the nozzle is 260℃.
图片名称
13 How can I clean the printing platform? How often should I change a new one?(Mini+) 2011-12-12 12:15:59
You can gently scrape off the residue in the printing platform with a knife. You can change the new one when it is broken.
图片名称
14 How often do I need to do leveling? Every time before printing the model?(Mini+) 2011-12-12 12:15:59
You can do the leveling when use the printer for the first time or the print results is failure or look no so good, but no need to do the leveling every time before printing the model.
图片名称
15 Does this 3D printer come with software? (Mini+) 2011-12-12 12:15:59
Yes, you can kindly find the slicing software in SD card.
图片名称
16 Is this 3d printer able to print metal?(Mini+) 2011-12-12 12:15:59
No it cannot print actual metal.
图片名称
17 Will it work on 220v power?(Mini+) 2011-12-12 12:15:59
Yes. The voltage ranges from 100 to 240v.
图片名称
18 Where can I find an operating manual? (Mini+) 2011-12-12 12:15:59
You can find the instruction manual in the SD card.
图片名称
19 Does this come with a sd card?(Mini+) 2011-12-12 12:15:59
Yes, It comes with a sd card, with instruction and software inside.
< 12 >