FAQ
FAQ
Integrate The 3D Printing Into Daily Life!
图片名称
0 Does it have a built in filament sensor to pause when you are out of filament?(Max) 2011-12-12 12:15:59
Yes, there is filament run out sensor.
图片名称
1 Is the build plate auto-leveling, or do you have to level it yourself?(Max) 2011-12-12 12:15:59
The build plate is manual levelling, we have to level it by ourselves.
图片名称
2 Is it easy to find replacement parts for the printer?(Max) 2011-12-12 12:15:59
Yes, you can buy the standard one in the market , or you can come to us with sales@goofoo3d.com.
图片名称
3 What is the highest temperature of the nozzle?(Max) 2011-12-12 12:15:59
The highest temperature of the nozzle is 260℃ or 400℃.
图片名称
4 How can I clean the printing platform? How often should I change a new one?(Max) 2011-12-12 12:15:59
You can gently scrape off the residue in the printing platform with a knife. You can change the new blue tape when it is broken.
图片名称
5 How often do I need to do leveling? Every time before printing the model?(Max) 2011-12-12 12:15:59
You can do the leveling when use the printer for the first time or the print results is failure or look no so good, but no need to do the leveling every time before printing the model.
图片名称
6 Does this 3D printer come with software? (Max) 2011-12-12 12:15:59
Yes, you can kindly find the slicing software in SD card.
图片名称
7 Does this have an option for a camera add-on?(Max) 2011-12-12 12:15:59
Yes, the camera is included in this model.
图片名称
8 How is this machine at avoiding clogging, specifically with carbon fiber nylon?(Max) 2011-12-12 12:15:59
It is better to change the brass nozzle to the hardened steel nozzle when print with abrasive filament like carbon fiber nylon and used the recommended settings.
图片名称
9 Does it come with both high temp and low temp extruder heads?(Max) 2011-12-12 12:15:59
The printer is equipped with the standard 260C extruder, and the customers can buy the 400C high heat extruder as needs.
图片名称
10 Is the extruder direct drive and not bowden tube?(Max) 2011-12-12 12:15:59
It is direct drive.
图片名称
11 What is the maximum nozzle temperature this printer can reach? What is the maximum bed temperature? What is the maximum enclosure temperature? (Max) 2011-12-12 12:15:59
The high heat extruder head can reach 400C temperature, the low heat extruder head can reach 260C temperature and the max bed temp is 120C. The maximum enclosure temperature is around 70 - 80C under extruder temp. of 400C and heat bed temp. of 120C and the intelligent temperature control system is on.
图片名称
12 Is this 3d printer able to print metal?(Max) 2011-12-12 12:15:59
No it cannot print actual metal.
图片名称
13 Will it work on 220v power?(Max) 2011-12-12 12:15:59
Yes. The voltage ranges from 100 to 240v.
图片名称
14 Where can I find an operating manual? (Max) 2011-12-12 12:15:59
You can find the instruction manual and tutorial video in the Sd card.
图片名称
15 Does this have a heated enclosure?(Max) 2011-12-12 12:15:59
Yes, the Max 3d printer has an intellegient temperature system inside the chamber.
图片名称
16 What types of filament can you use on this machine?(Max) 2011-12-12 12:15:59
We can print with PLA, PLA compount, ABS, PETG, ASA, TPU, TPE, PC, PP, PA-Nylon, PA-Carbon fiber, PA-Glass fiber, PEEK and so on.
图片名称
17 What is the printing dimensions?(Max) 2011-12-12 12:15:59
The printing size is 600x600x700mm.
图片名称
18 Is this dual z axis rods?(Plus) 2011-12-12 12:15:59
Yes, Plus 3d printer is dual z axis rods.
图片名称
19 Is there any requirement for the working environment?(Plus) 2011-12-12 12:15:59
The recommended working environment is +5C ~ 35C and 30 - 90% relative humidity (non-condensing).
< 1234...9 >