Description
High Temp Resin can be Used in medical, dental, automotive, consumer electronics and other models that require temperature resistance or strength. High temperature resin can be used for high temperature dental film and meet the refined needs of dental model assembly manufacturing, withstand high temperature and in low deformation.
Sellingpoint
Heat resistance
High strength
High precision
High rigidity
High hardness
Notes
1.Shake well before printing
2.After printing, it should be fully cured (more than 10min), and then put in the oven at 150℃ for 30min. The support can be removed after the post-processing
3. The wall thickness of the heat-resistant parts can be as thick as possible to achieve the heat-resistant performance, and the heat treatment time in the oven should not be too long
3D PRINTING PHOTOPOLYMER RESIN
| Viscosity(mPa-s) | 180-220 |
|---|---|
| Density(g/cm³） | 1.09-1.10 |
| Tensile Strength(MPa) | 70-85 |
| Elongation at Break(%) | 35-40 |
| Flexural Strength(MPa) | 95-105 |
| Impact Strength(J/m) | / |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(°C) | 100.5(After printing, place in a 150'C oven for 30 minutes) |
| Hardness(Shore D) Grades (out of 10) | 82-84 |
| Strength(S) | 10 |
| Toughness(F) | 8 |
| Forming(P) | 8 |
| Accuracy(S) | 7 |
| Speed(A) | 8 |
