Description
Used to clean the nozzles of the printers, After printing, use eClean filament to clean the nozzles, and then print other colors or types of materials.Especially when you plan to print low-temperature materials such as PLA and high-temperature materials such as carbon fiber reinforced nylon filament, eClean will greatly reduce the possibility of nozzle clogging; Transparent color and wide use temperature make eClean suitable for cleaning different colors, types and printing temperatures filaments.
Sellingpoint
Cleaning nozzles
Great compatibility
Notes
1.Shake well before printing
2. Slice setting:
Stronger support: Avoild break with main bodyDenser support：Avoid deformation dislocation
3.Printing data
Higher lifting distance: full film realseLifting distance：≥6mmSlowing down Lifting speed: avoid breakingLifting speed: ≤60mm/minControl leveling time: full levelingLight off delay≥6s
4.Post Curing
Properly control the post curing time, the longer the exposure time, the higher the hardness of the curing material, the worse the flexibility, and the heavier the yellowingTo ensure good flexibility of the material and avoid hardening problems caused by post-curing, it is recommended to clean the printed parts after printing instead of post-curingThe surface sticky hand condition will be gradually improved under the indoor weak light condition. Avoid strong light exposure for later storage
3D PRINTING PHOTOPOLYMER RESIN
| Viscosity(mPa·s) | 500-900 |
|---|---|
| Density(g/cm3) | 1.080-1.085 |
| Tensile Strength(MPa) | 4-5 |
| Elongation at Break(%) | 250-350 |
| Flexural Strength(MPa) | / |
| Impact Strength(J/m) | / |
| Tearing Strength(GPa) | 8-10 |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 70A |
