Sellingpoint
High rigidity
High wear resistance
High impact resistance
Excellent printability
Description
The glass fiber reinforced pla filament has high impact resistance and good printability; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes ePLA-GF suitable for printing gears and can be used as temporary functional parts.
Notes
1. PLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible
2. PLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced
3. The blowing fan can be properly turned off to improve the model strength
| Density(g/cm3) | 1.31 |
|---|---|
| Heat Distortion Temp(℃,0.45MPa) | 56 |
| Melt Flow Index(g/10min) | 56 |
| Tensile Strength(MPa) | 6.36（190℃/2.16kg） |
| Elongation at Break(%) | 59.27 |
| Flexural Strength(MPa) | 7.99 |
| Flexural Modulus(MPa) | 85.01 |
| IZOD Impact Strength(kJ/㎡) | 4414.89 |
| Durability | 10.16 |
| Printability | 4/10 |
| Extruder Temperature(℃) | 9/10 |
| Bed temperature(℃) | 190 – 230℃ |
| Fan Speed | 45 – 60°C |
| Printing Speed | 100% |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
